Author Topic: ED: Power to systems not working  (Read 1973 times)

Cmdr Gaulkahn

  • Newbie
  • *
  • Posts: 6
ED: Power to systems not working
« on: June 05, 2022, 12:08:28 PM »
I've been living with an issue the last several weeks.  When in Elite Dangerous, when I say 'power to weapons' I get 4 pips to weapons no matter what they were set as.  Same goes for Engines.  But when I say 'power to systems (or shields)' I get one.  It will also successfully 'balance power' as well.  I checked my key binds, there is no conflict.  Is this a known issue?  I thought about attempting to change the ms timing between button presses but I cant seem to find it in any setting anywhere...was this removed?  Any help would be appreciated.  thank you!   

Pfeil

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4785
  • RTFM
Re: ED: Power to systems not working
« Reply #1 on: June 05, 2022, 12:34:05 PM »
As previously, for questions regarding HCS Voice Packs products, you'll want to contact them directly (via their forum, or their Discord)

VoiceAttack itself has never had a global setting for keypress timings; that is set within the individual commands.

Cmdr Gaulkahn

  • Newbie
  • *
  • Posts: 6
Re: ED: Power to systems not working
« Reply #2 on: June 07, 2022, 03:53:44 PM »
This issue has occurred without using voice packs as well as with using voice packs.  So it is not a voice pack issue.  But a clever way to deflect.  Thanks for your reply.

Pfeil

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4785
  • RTFM
Re: ED: Power to systems not working
« Reply #3 on: June 07, 2022, 04:11:28 PM »
As you mentioned in a previous topic that you were using HCS Voice Packs products, and that you are referring to commands as if they are standard components, as well as a setting that has never existed within VoiceAttack itself, I inferred that you were most likely referring to those products.


When you experienced an issue while you were not using HCS Voice Packs products, what did the commands you were using contain? Did you create these commands yourself, or was this using a profile from another user?
Were you using a plugin to retrieve the key bindings from the target application at that time?

Gary

  • Administrator
  • Hero Member
  • *****
  • Posts: 2832
Re: ED: Power to systems not working
« Reply #4 on: June 07, 2022, 04:41:27 PM »
This issue has occurred without using voice packs as well as with using voice packs.  So it is not a voice pack issue.  But a clever way to deflect.  Thanks for your reply.

I was also under the impression that this was HCS-related given the context - something changed recently that was working before, references to pips and shields, not being able to change timings for bindings (referring to locked commands, customizer), no indication at all that this was a homemade profile, etc.  Without even reading your two other posts that were HCS pack-related, this seemed like an HCS discussion.  I would have directed your issue in the same fashion.  Let's try to be a little more civil in how we address folks here.

Thanks.