This solved 30% of my commands wasnt reccognized or correct reccognized

[gorgo]

hi.

For years I did do the windows voice training to achieve correct recognizing of my spoken commands. It nearly helped at all. Still getting approx 30% wrong recognizing.

Few days back I read some used the voice training from VA itself and I did work. Now the approx error is nearly 98-99% correct.

I have no explanation why it helped, but it did

Heres howto get to the trainee:

Open VA
Click on wrenchtool icon (bottom right).
Click on Utilities >   (upper right side)
Click on add/remove dictionary words
choose i.e. Add a new word (you can do phrase too)
Write the word or phrase
Check the record a pronunciation upon finish
Click finish
Click on Record button
Speak the word you previously typed in.
(I repeat several times, donno if thats nessecary.

And, teaching each command like the above,  I can use my native language when I, ingame, speak the commands

regards

[kmaulden]

Gorgo is right - this works GREAT - but with the new version, the button is in a different location now.

Click the Wrenchtool icon
Click the Recognition tab
Click the Utilities button (then go from there as Gorgo notes below).

[solkirk]

Very handy tip. I have minimum confidence level at 75%. This has helped reduce the amount of rejections I receive.