[1.5.8.20] reports on starting "An attempt was made to load an assembly..."

[Phil Hodgkins]

1.5.8.20 beta reports on starting "An attempt was made to load an assembly from a network location which..."
It reports that commands are being carried out, but tests using NP++ show no output for Key Press commands (other tests not carried out). (Just read Pfiels's report that commands are not executed if listening is disabled, which was the case during my testing). Will re-try testing if needed.
In Edit Command, "When I press button" produces Joystick Error message
These problems don't occur with 1.5.8.18 beta

[Gary]

Hi, Phil.

In your VA folder, make sure you have the following dlls:
SharpDX.DirectInput.dll
SharpDX.dll
VAJS.dll

Very strange.  You might want to try installing the latest beta and see if that corrects the problem.