If a command selected for the "Execute a command each time this profile is unloaded" option contains a "Switch to Another Profile" action, it will cause the profile set in that action to be loaded multiple times when a user attempts to switch profiles, until eventually the unload command is stopped, after which the "Profile" dropdown will show the profile selected in the action as if it is active, while the actual active profile will be the one the user chose to switch to.
This occurs with both "Switch profile by selection" and "Switch by name (Advanced)".
Also applies up to v1.8.3.28 and back to v1.7.1 (where unload commands were implemented)
EDIT: Fixed in v1.8.3.29
Topic: [v1.8.3] "Switch to Another Profile" not ignored in profile unload command (Read 2068 times)