[v1.6.6.10] "Play a Sound" channel reverts to initial setting when changing file

[Pfeil]

When either adding or editing a "Play a Sound" action, if the "Channel" selection is changed, and a new file is selected after this, the "Channel" dropdown reverts to the value it had when the window opened.

E.G.

• Add a "Play a Sound" action to a command
• Change the "Channel" value via the dropdown to something other than "Default"
• Use the "..." button and add a sound
• Note that the "Channel" value has reverted to "Default"

As an aside, the "Channel" value for a new "Play a Sound" action is always "Default", whereas other such controls often remember the last-saved value. This could be by design, just making note of it.

[Gary]

Ah... I see it.  That's a very weird behavior.  I'll see what's up.

I'm not really sure if I want to make the channel and balance, 'sticky', as they are a couple of options that I don't see being used much at all but in very specific cases.  Thank you for pointing it out.


Edit - This has been wrangled.  I put a build out in the, 'unofficial' bin:
http://www.voiceattack.com/unofficial


If it's working for you, let me know and this will go to full release.  Thanks again, bud.

[Pfeil]

If it's working for you, let me know

Working fine in v1.6.6.11